Analog Bandwidth (-3 dB)

100 MHz

Rise Time (10% to 90%, typical)

≤5 ns ≤3.5 ns

No. of Analog Channels

4

Sampling Mode

Real-time Sampling

Max. Sample Rate of Analog Channel

1.25 GSa/s (single-channel), 625 MSa/s (full-channel)

Max. Memory Depth

25 Mpts (single-channel), 10 Mpts (full-channel)

Max. Waveform Capture Rate

30,000 wfms/s (Vector Mode) 1,000,000 wfms/s (UltraAcquire Mode)

Vertical Resolution

12 bits

Hardware Real-time Waveform Recording and Playing

Max. 500,000 frames

Peak Detection

Capture 1.6 ns glitches

LCD Size and Type

7'' capacitive multi-touch screen

Display Resolution

1024x600

Input Coupling

DC, AC, or GND

Input Impedance

1 MΩ ± 1%

Input Capacitance

15 pF ± 3 pF

Maximum Input Voltage

CAT I 300 Vrms, 400 Vpk (DC + Vpeak)

Range of Time Base

5 ns/div to 500 s/div

Trigger Type

Edge trigger, Pulse trigger, Slope trigger, Video trigger, Pattern trigger, Duration trigger, Timeout trigger, Runt trigger, Window trigger, Delay trigger, Setup/Hold trigger, Nth Edge trigger, RS232/UART, I2C, SPI, CAN

Search & Navigation Type

Edge, Pulse

Waveform  Measurement function

Yes

Waveform  Calculation function

Yes

Waveform Recording & Analysis

Yes

Serial  Decoding function

Yes

AutoScale

Min voltage > 10 mVpp, duty cycle > 1%, frequency > 35 Hz

Digital  Voltmeter Function

Yes; DC, AC+DCrms, ACrms

High-precision  Frequency  Counter

Yes

Processor

Cortex-A72 up to 1.8 GHz, 6-core processor

System  Memory

4 GB RAM

Operating System

Android

Internal Non-volatile Memory

8 GB

USB2.0 Host

1 on the front panel

USB2.0 Device

1 on the rear panel

LAN

1 on the rear panel, 10/100 Base-T, supporting LXI-C

Web Remote Control

Supports Web Control interface (input the IP address of the oscilloscope into the Web browser to display the operation interface of the oscilloscope)

EXT Interface

-

AUX Output Interface

1 on the rear panel, BNC connector; Vo (H) ≥ 2.5 V open circuit, ≥1.0 V 50 Ω to GND; Vo (L) ≤ 0.7 V to load ≤4 mA, ≤0.25 V 50 Ω to GND

Trigger Output

Outputs a pulse signal when the oscilloscope is triggered

Pass/Fail Output

Output a pulse signal when a pass/fail event occurs. Supports user-defined pulse polarity and pulse time (100ns to 10 ms)

HDMI Video Output

1 on the rear panel, HDMI 1.4, A plug. It is used to connect to an external monitor or projector

Probe Compensation Output

1 kHz, 3 Vpp square waveform

Power Supply Interface

USB Type-C

Power Voltage

DC 12 V, 4 A

Power

Max. 48 W (when connected to various interfaces, USB storage device, active probes)

Recommended Calibration Interval

18 months

Operating Temperature Range

0℃ to 50℃

Dimensions

265.35 mm x 161.75 mm x 77.38 mm

Weight without package

1.78 kg