Phoenix Smart IP43 Charger 12/30(1+1) 230V

With boat owners in mind, this adaptive 5-stage charger is capable of both 30 and 50 A charge for each of the three battery banks. Alternatively , thePhoenix 1+1 model provides 3A for the starter battery and the rest for the "home" bank. The24V models are available with 16A/25A charging. With Bluetooth enabled, you can monitor the charger and set alarms directly from your phone. Adaptive, intelligent, dynamic charging features - see the "Adaptive, intelligent, dynamic charging features" section.See the datasheet below.

Features

"Bluetooth Smart enabled

Any Bluetooth-enabled smartphone, tablet or other device can be used to monitor, change settings and update the charger as new software features become available.

"Phoenix Smart (1+1): two outputs for charging 2 battery banks

The second output, limited to approx. 3A and with a slightly lower output voltage, is used to top up the starter battery.

Automatic voltage compensation

The charger compensates for the voltage drop across the DC wires by slightly increasing the output voltage when the DC current increases. Please refer to the manual for details.

Adaptive 5-stage charging algorithm: volume - absorption - refresh - float - storage

"The Phoenix smart charger features the well-known 'adaptive' battery management system, which can be pre-set to suit different battery types. "The adaptive function will automatically optimise the charging process in relation to the way the battery is used.

Correct charge size: variable absorption time

When only shallow discharges occur (e.g. a yacht connected to shore power), the absorption time is short to avoid overcharging the battery. After adeep discharge, the absorption time is automatically extended to make sure the battery is fully charged.

Also recharges lithium-ion (LiFePO4) batteries

• On-off control of the charger can be implemented by connecting a relay or the open output of a collector optical switch from the Li-ion BMS to a remote on-off port.
• Alternatively, full control of voltage and current is possible via Bluetooth.

Fully programmable charging algorithm

• The charging algorithm can be programmed via Bluetooth or VE.Direct interface.
• Three pre-programmed algorithms can be selected using the mode button (see specifications).

Remote on/off

• Remote on/off consists of two terminals: "Remote H" and "Remote L.".
• A remote on/off switch or relay contact can be connected between H and L.
• Alternatively, terminal H can be raised high or terminal L can be lowered.

VE. Direct interface

• For wired data communication with the Color Control panel, PC or other devices.
• See the VictronConnect software in the Downloads/Software section of our website.

Programmable relay

Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trigger alarms or other events.

The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].

With boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. Or the charger 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.