Power module PiEnergy-Mini compatible Raspberry Pi 3, 4, 5; input 6 to 36 V DC JOY-IT
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 1 pcs | Vilnius Žirmūnai Store |
| 2 pcs | Vilnius Naujamiestis Store |
| 3 pcs | Kaunas Store |
| 1 pcs | Klaipėda Store |
| 1 pcs | Šiauliai Store |
| 3 pcs | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| 1 pcs | Vilnius Žirmūnai Store |
| 2 pcs | Vilnius Naujamiestis Store |
| 3 pcs | Kaunas Store |
| 1 pcs | Klaipėda Store |
| 1 pcs | Šiauliai Store |
| 3 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
Over €50.00 (Orders up to 1000 kgs) | For free |
To €50.00 (Orders up to 3 kgs) | €3.49 |
To €50.00 (Orders up to 1000 kgs) | €4.99 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€2.39
Product description
With the PiEnergy-Mini, you can operate your Raspberry Pi with a voltage of 6 to 36 V DC. You can use the button integrated on the board to both power up and power down your Raspberry Pi.
Communication with the Raspberry Pi is via GPIO4, but this connection can also be cut by removing a resistor to use the pin freely. Thanks to the ultra-flat design, it can also be used in many housings. The pin header is included and not soldered on to keep the design even flatter.
Special feature: Ultra-flat design, integrated button for powering up and shutting down the Raspberry Pi
Compatible with: Raspberry Pi 3, 4, 5
Input voltage: 6 to 36 V DC
Output voltage: 5,1 V
Output current: Up to 3 A (active ventilation recommended for additionally connected loads)
Interface to the Raspberry Pi: GPIO4
Microcontroller: STM8S001J3
Further connections: 5V fan connector (2pin / 2.54mm), Solder pads for external on / off switch
