Rebel POWER-800 UPS - Pure Sine Wave Inverter with 12V/230V Charging, 800VA/500W

Rebel POWER-800 UPS - Pure Sine Wave Inverter with 12V/230V Charging, 800VA/500W

Rebel POWER-800 Backup Power Supply If your home has devices that require continuous power, you should also invest in a backup power supply. This device is especially useful during the winter, as in the event of a power outage, it will maintain the stable operation of the furnace, pump, or other installations guaranteeing home heating. 800 VA / 500 W * Rated power: 500 W * Battery type: 12 V DC * Input voltage: 190 - 260 V AC * Output voltage: 230 V AC +/-5% * Output voltage waveform: pure sine wave * Battery charging current: 10 A * Switching time: < 4 ms Emergency Home Power Supply The task of Rebel emergency power systems is to protect devices from power failures, and consequently from disruption or interruption of their operation. Considering what UPS to choose for your gas boiler, or perhaps you are interested in a UPS for a pea-coal or pellet boiler? The Rebel POWER series of devices is perfectly suited as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or e.g., automation devices in installations using heat convectors and any devices particularly sensitive to the slightest changes in voltage waveform. Their advantage is a pure sinusoidal output voltage waveform (supplying loads), thanks to which the device ensures stable operation, preventing the overheating effect of inductive loads. Together with a 12V battery, they constitute a complete guaranteed 230 VAC power supply. Home Backup Power Supply – Applications * Emergency power supply for furnaces * Consumer electronics (TVs, tuners, hi-fi, DVD) * Home appliances (refrigerators, blenders) * Power tools (drills, grinders) * Charging power supplies (smartphones, tablets, phones, laptops) * Pumps, compressors (water, hot water, air conditioners) * Office equipment (faxes, computers, monitors) Safety Guarantee Rebel backup power supplies are equipped with a number of safety features, e.g., against overload, short circuit, and too high and too low voltage. The solutions used form the foundation of safety and your peace of mind! Three operating modes Emergency power supply mode with charging function, converts 12V DC voltage supplied from an external battery into 230V AC voltage and recharges the external battery. Rectifier mode recharges the external battery. Inverter mode converts 12V DC voltage from the battery into 230V AC voltage. Backup power supply with constant phase The Rebel backup power supply works with devices that are equipped with phase detection, such as some models of gas boilers. The phase in our device is in a fixed position, regardless of whether it is powered from the mains socket or the battery. Backup power supply for furnace with battery The basis for the proper operation of the Rebel backup power supply is a correctly selected battery. To select the appropriate device, use the approximate formula: 100 W load = 10 A current draw from the battery. The battery for powering the house is not included in the set. To ensure the best operation of your backup power supply, choose a Rebel or Vipow brand battery. LED Display Comfortable use of the Rebel backup power supply is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things, the input and output voltage and frequency levels. Moreover, you can quickly check the load level and battery charge level.