Automotive IP65 Charger 12V/4A-12V/0,8A
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 Not available | Vilnius Žirmūnai Store |
| Not available | Vilnius Naujamiestis Store |
| Not available | Kaunas Store |
| Not available | Klaipėda Store |
 1 pcs | Šiauliai Store |
| Not available | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| Not available | Vilnius Žirmūnai Store |
| Not available | Vilnius Naujamiestis Store |
| Not available | Kaunas Store |
| Not available | Klaipėda Store |
| 1 pcs | Šiauliai Store |
| Not available | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €30.00 (Orders up to 1000 kgs) | For free |
To €30.00 (Orders up to 3 kgs) | €2.99 |
To €30.00 (Orders up to 1000 kgs) | €3.59 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€1.99
Product description
Car IP65 battery charger 12V / 4A - 12V / 0,8A with DC connector
DC connector
Depending on the application, clips, loops or cigarette plugs can be connected to the charger (all included).
Less maintenance and aging when the battery is not in use: storage mode
Thestandby mode is activated when the battery has not been discharged within 24 hours. In standby mode, the standby voltage is reduced to 13.2 V to reduce gassing and corrosion of the positive plates. Once a week,the voltage is raised again to the absorption level to 'flatten' the battery. This feature prevents electrolyte layering and sulphation, which is the main cause of premature battery failure.
Protected against overheating and reverse polarity connection
Theoutput current will decrease when the temperature rises to 40°C, but the charger will not fail. Theoutput relay protects against reverse polarity coupling.
Five LED indicators for status and mode display
When connected to the AC mains, the STAND-BY indicator will light up. There will be no voltage at the output. When connected to a battery (battery voltage must be above 8.5 V), the MODE button allows the user to select from three charging profiles:
- Limited current t0 0.8A and absorption voltage 14.4V. Red LED
- Current 4A and absorption voltage of 14.4V. Red LED will light up > 14Ah. Application: for rechargeable, AGM or GEL batteries. Ambient temperature 10-35°C.
- Current 4A and absorption voltage of 14.7V. Red LED COLD will be lit. Use: for rechargeable, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring higher charging voltage.
The red LED Charging will be lit until the battery is fully charged.
When charging is complete, the red LED FULL will be lit.
In the case of a reverse polarity connection, the red LED! will be ON.
If the red LED STANDBY remains lit even when the MODE button is pressed, the connection to the battery is broken.
The charger always enters standby mode when connected to the AC mains.
The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].
Useful information
Specifications
Supplier product description
Low power charger for 6V and 12V batteries:
IP65 Charger 6V/12V-1,1A
Charger for 12V batteries with two charge current options:
IP65 Charger 12V/4A – 12V/0,8A
