Delivery terms
Pickup In Store For free
Quantity in shop
2 pcs | Vilnius Žirmūnai Store |
5 pcs | Vilnius Naujamiestis Store |
3 pcs | Kaunas Store |
3 pcs | Klaipėda Store |
2 pcs | Šiauliai Store |
>20 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €30.00 (Orders up to 1000 kgs) | For free |
To €30.00 (Orders up to 3 kgs) | €2.99 |
To €30.00 (Orders up to 1000 kgs) | €3.59 |
Delivery to a DPD Pickup location
€1.99
Product description
Xtar VC8
for 18650, AA, AAA and other sizes of lithium-ion and Ni-MH batteries...
Main features - Lithium-ion battery charging with three-stage TC/CC/CV charging process - Charging of Ni-MH batteries using 0ΔV and -ΔV - Eight independent charging channels - adjustable charging current - LCD display showing cell voltage and charging current and internal resistance - indicates the current used for charging - ability to measure cell capacitance (measurement error ±5%) - powered by any USB charger with USB port or USB port on your computer - reactivation function for deeply discharged cells - protection: short circuit, thermal, reverse polarity |
Xtar is a well-known manufacturer of high quality lithium-ion chargers, flashlights and lithium-ion batteries. Xtar products are sold in more than 120 countries, including the United States, Canada, Canada, the United States, Canada, the United States, the United States, the United States, the United Kingdom, the United States, the United States, the United States and the United States.Xtar uses the highest quality materials for its chargers , from the plastic housing to the efficient electronics. All Xtar chargers are CE-certified for European markets. |
The VC8 is a professional processor charger with a three-stage charging process for TC/CC/CV Li-ion cells and 0ΔV and -ΔV Ni-MH batteries.Charges 1-8 Li-ion 3.6/3.7V and Ni-MH cells of any capacity in sizes AAA/R03, AA/R6, 10440, 14500, 14650, 16340, 17500, 17670, 18350, 118500, 118500, 118700, two edgeThe two edge channels allow the charging of low internal resistance batteries even at 3A current (only 1 cell).
Xtar VC8 backlightLCDdisplay shows the latest information on the charger's operating status: Voltage, charging current, charge used to charge the cells, internal resistance of the cells, error indication and end of charge notification.You can change the type of information displayed at any time by pressing the "disp" or mode button.Switching between charging modes can be done by holding down the mode/displ buttons for a longer time.The charging current can be changed to higher/lower at any time - the charger has measured the internal resistance of the cell and negotiates the maximum (optimum) charging current.Use the Grad option to measure the capacity of the battery. Once you have completed the process of evaluating the cell quality from the display,
The maximum charging current is 3A and is only available for the two extreme channels and only when the middle channels are not in use - the maximum charger with this current can charge 1 battery at a time.If 2 batteries are present, the maximum charging current will be 2A. If 4 cells are present, the maximum charging current will be 1A. The maximum charging current will be limited to 0.5A.
What is TC/CC/CV charging? It is a three-stage charging process for lithium-ion cells that ensures that the cell is in good condition by charging at the right current at each stage and completing the charging process at the right time.
The different stages of the TC/CC/CV process are:
- TC phase: cells discharged below 2.9 V are "woken up" at a lower current.
- CC phase: after reaching 2,9 V, the cell is charged at a constant current between 0,1 A and 1 A (depending on the power supply used and the number of batteries charged).
- CV phase: when the cell is nearly charged, the charger switches to charging at a decreasing current until the voltage on the cell reaches 4,2 V. When 4,2 V is reached, the charging process is complete and the battery is fully charged.
Charged batteries left in the charger will undergo a natural self-discharge process. Charging of lithium-ion batteries will continue when the battery voltage drops below 3,9 V.Charging of Ni-MH batteries will not resume when the voltage drops due to self-discharge.
The Xtar VC8 charger performs adeep discharge and reactivation of the 0 V cells. Many chargers on the market are not capable of recharging such batteries.Here is the Xtar VC8 charger, which in many cases allows you to "save" such cells.Simply insert a deeply discharged battery into the VC8 charger, as with normal charging, the charger will detect the discharged cell and attempt to reactivate it.
Caution: Cells discharged below a certain level are irreparably damaged and may no longer be activated.Avoid discharging Li-ion and Ni-MH batteries too deeply, which can significantly reduce their durability and capacity or cause them to fail completely.
TheXtar VC8 charger comes with a USB cable. A power supply is not included. QC3 is required to power the charger.A weaker power supply can be used, the VC8 will adjust the charging current according to the capabilities of the power supply.
Product details | |
Manufacturer | Xtar |
Charger model | VC8 |
supported battery types | 1-8 lithium-ion batteries 3.6-3.7 V, protected and unprotected 1-8 Ni-MH batteries |
supported battery sizes | AAA, AA, R14, 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 20700, 21700, 22650, 25500 R14, R20, 20700, 21700, 22650, 25500, 26650 |
maximum battery length | 71 mm |
charging method | Li-ion - processor controlled TC/CC/CV NiMH - processor controlled 0ΔV and -ΔV |
Charging | 1x 3A (only on one of the two extreme channels 1 and 8) 2x 2A / 4x 1A / 8x 0.5A |
terminal voltages Li-ion charging | 4.2V ±0.05V |
Lithium-ion planning current | <120mA |
LCD functions | Current indications: Working/charging status |
additional functions | reactivation of deeply discharged 0V cells and cell capacity measurement |
Safety | Thermal Short circuit protection before battery replacement |
Input voltage and input current | QC 3.0 (5 V / 2 A | 9 V 2 A) - USB Type-C port |
USB Type-C cable,
24-month manual warranty.
The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].