Filament ASA red 1.75mm 1kg refill packing Rosa3D
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 1 pcs | Vilnius Žirmūnai Store |
| 2 pcs | Vilnius Naujamiestis Store |
| 2 pcs | Kaunas Store |
| 1 pcs | Klaipėda Store |
| 2 pcs | Šiauliai Store |
| 9 pcs | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| 1 pcs | Vilnius Žirmūnai Store |
| 2 pcs | Vilnius Naujamiestis Store |
| 2 pcs | Kaunas Store |
| 1 pcs | Klaipėda Store |
| 2 pcs | Šiauliai Store |
| 9 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €50.00 (Orders up to 1000 kgs) | For free |
To €50.00 (Orders up to 3 kgs) | €3.49 |
To €50.00 (Orders up to 1000 kgs) | €4.99 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€2.39
Product description
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers.
Recommended printing parameters:
- extrusion temperature 220-250°C
- bed temperature: 90-110°C
The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).
It is recommended to print in a closed chamber.
PRODUCT PARAMETERS
- Color: red
- Diameter: 1.75 mm
- Weight: 1000 g (vacuum packed)
- Density: 1.07 g/cm3
- Odor: almost odorless
- Vicat softening point: 94 ° C (ASTM 1525)
- Diameter tolerance: +/- 0,05
- Oval tolerance: +/- 0,02
- Tensile elongation: 35 %
- Tensile strength (to break): 40 MPa
Printable model for refill spool sides you can download here:
