Filament PLA multicolor silk Fire 1.75mm 0.8kg Rosa3D
Pickup at the LEMONA electronics store within 2 hours (if the item is in the store and the order is placed before 3 p.m.)
 3 pcs | Vilnius Žirmūnai Store |
| 4 pcs | Vilnius Naujamiestis Store |
| 2 pcs | Kaunas Store |
| 2 pcs | Klaipėda Store |
| 2 pcs | Šiauliai Store |
| 5 pcs | Central Warehouse (new location) |
Home delivery in Lithuania 1-2 b.d.
Delivery to pickup location 1-2 b.d.
Products purchased together
Delivery terms
Pickup In Store
Pickup In Store For free
Quantity in shop
| 3 pcs | Vilnius Žirmūnai Store |
| 4 pcs | Vilnius Naujamiestis Store |
| 2 pcs | Kaunas Store |
| 2 pcs | Klaipėda Store |
| 2 pcs | Šiauliai Store |
| 5 pcs | Central Warehouse (new location) |
Home delivery in Lithuania
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €30.00 (Orders up to 1000 kgs) | For free |
To €30.00 (Orders up to 3 kgs) | €2.99 |
To €30.00 (Orders up to 1000 kgs) | €3.59 |
Delivery to a DPD Pickup location
Delivery to a DPD Pickup location
€1.99
Product description
PLA Rainbow is a unique blend of PLA (polylactide)-based materials. Each spool contains several smoothly changing colors. This makes the print made of filament from the PLA Rainbow product line unique.
Application:
- decorations (e.g. interior design elements such as lamp shades or vases)
- toys (e.g. figurines)
- gadgets (e.g. key rings, pendants)
- printing personalized gifts.
PLA Rainbow Silk Fire does not require printing in a closed chamber, however, we recommend using a higher extrusion temperature than usually for PLA Starter. This filament is characterized by low shrinkage and is odorless. Prints from PLA Rainbow Silk Fire are characterized by great interlayer adhesion and very good detail reproduction.
ATTENTION! The frequency and sequence of color transitions is fixed for a given production batch. A single spool may start at any point in the process, e.g. one spool may start red and another spool orange. Shade differences are allowed.
Recommended printing parameters:
- extrusion temperature 185-225°C
- bed temperature: 40-60°C
- fan: 50-100%
- print speed: 60-80 mm/s
The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.
PRODUCT PARAMETERS
- Color: deep red, luminous orange and golden tones
- Diameter: 1.75 mm
- Weight: 800 g (vacuum packed)
- Density: 1.24 g/cm3
- Odor: odorless
- Heat deformation temperature: 55°C (ASTM E2092)
- Diameter tolerance: +/- 0,05
- Oval tolerance: +/- 0,05
- Tensile elongation: 6 %
- Tensile strength (to break): 53 MPa
