Delivery terms
2024-09-06 Estimated delivery
Product will be ordered from supplier. If the supplier is unable to deliver by the specified date, we will inform you by e-mail
Supplier Warehouse |
Home delivery in Lithuania
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Lithuania please use www.lemona-electronics.eu to order.
Over €50.00 (Orders up to 1000 kgs) | For free |
To €50.00 (Orders up to 3 kgs) | €3.49 |
To €50.00 (Orders up to 1000 kgs) | €4.99 |
Delivery to a DPD Pickup location
After handing over the goods to the courier, we will inform you by e-mail. Orders over €50.00 are delivered free of charge.
€2.39
Product description
Linear smoke detector FireBeam Blue (7-70 m, Bluetooth)
Specifications
SKU
U-3953316
Product code
PSFBBLUE
Supplier product description
- Controlled and configured via Bluetooth with a smartphone
- IP65 moisture-resistant housing
- Power supply voltage: 10.2 V - 30 V
- Operation range: 7-70 m. (expandable to 160 m.)
- Automatic adjustment mechanism
- General
- Supply Voltage12 to 30 Vdc normal
- Supply Current5.5mA in all operational states
- Supply Current13.5mA in fast commissioning
- Temperature-10°C to +55°C
- Humidity10 to 95% RH Non-condensing
- Protection IndexIP65 when suitably mounted and terminated
- Optical Wavelength870nm
- Maximum Angular Alignment±5°
- Maximum Angular Misalignment(static not auto-aligning)
- Alarm Sensitivity Levels25% (1.25dB) to 50% (3dB) in 1% (0.05dB) increments (default 35% (1.87dB))
- Alarm ConditionObscuration drops to below pre-defined sensitivity level. Time to Alarm Condition adjustable between 2 to 30 seconds in 1 second increments (default 10 seconds)
- Alarm IndicationApp Status - FIRE, Head Red Flashing LED, Alarm Relay Change Over (CO) Contact, Rating 2A @ 30 VDC
- Test / Reset FeaturesBeam test function with App, Alarm latching / auto-reset selectable (default auto-reset), Alarm reset in latching mode with App reset function, removing power for >5 seconds or momentarily apply >5 VDC to reset connections in Beam Head
- Fault Sensitivity Level<4%
- Fault ConditionObscuration drops to below the fault sensitivity level within 1 second, Power Down or Supply Voltage < 9 VDC, Commissioning modes, Pre-Alignment and Auto-Alignment, Beam turned off during Beam Maintenance, Time to Fault Condition adjustable, 2 to 60 seconds in 1 second increments (default 10 seconds)
- Fault IndicationApp Status - FAULT, Head Yellow Flashing LED 1 Second, Fault Relay Change Over (CO) Contact Rating 2A @ 30 VDC
- Normal ConditionObscuration level is above the Alarm sensitivity level, App Status - NORMAL, Programmable on/off, Head Green Flashing LED, Programmable on/off
- Auto-Align / Beam Contamination CompensationAuto-align during normal operation if obscuration drops below 90% for the duration of the align time set (doesn't affect normal operating mode), Beam Contamination Compensation 4 hour monitoring. Compensation data available in the App
Supplier parameters
Product code
PSFBBLUE
Category
Beam Detectors
Supplier's product code
PSFBBLUE
Product ID
U-3953316
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].