TELTONIKA industrial 5G router LTE RUTX50
Номер продукта: LTERUTX50
Марка
Больше похожих продуктов
Сроки доставки
2024-10-31 Планируемая доставка, если Вы закажете сейчас
Товар заказывается со склада поставщика. Если поставщик не сможет доставить данный товар до указанной даты, мы информируем Вас по электронной почте.
 Доступно | Склад поставщика |
Доставка на дом
Доставка на дом
После передачи товара курьеру мы сообщим вам об этом по электронной почте.
Более 50,00 € (Заказы до 1000 кг) | Бесплатно |
К 50,00 € (Заказы до 3 кг) | 3,49 € |
К 50,00 € (Заказы до 1000 кг) | 4,99 € |
Получение в почтомате
Получение в почтомате
После передачи товара курьеру мы сообщим вам об этом по электронной почте.
2,39 €
Описание товара от поставщика
- 5G industrial router
- Aluminum body
- Mobile speed up to 3.3Gbps
- Dual-band data throughput for up to 150 customers simultaneously
- Backward compatible with 4G (LTE CAT 20) and 3G network technologies
- GNSS, Geofencing
- 2 sim
- Mobile
- Mobile module5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
- StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
- SMS/CallSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
- USSDSupports sending and reading Unstructured Supplementary Service Data messages
- Black/White listOperator black/white list
- Band managementBand lock, Used band status display
- APNAuto APN
- Bridge modeDirect connection (bridge) between mobile ISP and device on LAN
- PassthroughGateway assigns its mobile WAN IP address to another device on LAN
- Multiple PDNPossibility to use different PDNs for multiple network access and services
- Wireless
- Wireless mode802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
- WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
- ESSIDESSID stealth mode
- WiFi usersUp to 150 simultaneous connections
- Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built-in customizable landing page
- Wireless mesh/roamingWireless mesh (802.11s), fast roaming (802.11r)
- Ethernet
- WAN1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
- Network
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
- RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- FirewallPort forwards, traffic rules, custom rules
- DHCPStatic and dynamic IP allocation
- DDNSSupported >25 service providers, others can be configured manually
- SSHFSPossibility to mount remote file system via SSH protocol
- Security
- AuthenticationPre-shared key, digital certificates, X.509 certificates
- FirewallPre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
- Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLANPort and tag-based VLAN separation
- Mobile quota controlSet up custom data limits for SIM card
- WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
- VPN
- OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
- OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- GRE tunnelGRE Tunnel
- IPsecIKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
- SSTPSSTP client instance support
- STUNNELProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPNMethod of building scalable IPsec VPNs
- PPTP, L2TPClient/Server services can run simultaneously, L2TPv3 support
- WireGuardWireGuard VPN client and server support
- ZeroTierZeroTier VPN
- Modbus TCP Slave
- ID filteringRespond to one ID in range [1;255] or any
- Allow remote accessAllow access through WAN
- Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
- Modbus TCP master
- Supported functions01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
- MQTT gateway
- GatewayAllows sending commands and receiving data from MODBUS Master through the MQTT broker
- DNP3
- Supported modesTCP Master, DNP3 Outstation
- Date to server
- ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
- IoT PLATFORMS
- Clouds of thingsAllows monitoring of: Device data, Mobile data, Network info, Availability
- ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
- Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
- Monitoring and management
- WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
- FOTAFirmware update from server, automatic notification
- SSHSSH (v1, v2)
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
- CALLReboot, Status, Mobile data on/off, Output on/off
- TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTTMQTT Broker, MQTT publisher
- SNMPSNMP (v1, v2, v3), SNMP trap
- JSON-RPCManagement API over HTTP/HTTPS
- MODBUSMODBUS TCP status/control
- RMSTeltonika Remote Management System (RMS)
- System Characteristics
- CPUQuad-core ARM Cortex A7, 717 MHz
- RAM256 MB (100 MB available for userspace)
- FLASH storage256 MB (80 MB available for userspace)
- Firmware / Configuration
- WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
- FOTAUpdate FW
- RMSUpdate FW/configuration for multiple devices at once
- Keep settingsUpdate FW without losing current configuration
- Firmware customization
- Operating systemRutOS (OpenWrt based Linux OS)
- Supported languagesBusybox shell, Lua, C, C++
- Development toolsSDK package with build environment provided
- Location tracking
- GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
- CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEANMEA 0183
- Server softwareSupports server software: TAVL, RMS
- GeofencingMultiple configurable geofence zones
- USB
- Data rateUSB 2.0
- ApplicationsSamba share, USB-to-serial, Modbus gateway
- External devicesPossibility to connect external HDD, flash drive, additional modem, printer
- Storage formatsFAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
- Input/Output
- Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
- Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
- EventsSMS, Email, RMS
- I/O jugglerAllows setting certain I/O conditions to initiate event
- Power
- Connector4-pin industrial DC power socket
- Input voltage range9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
- PoE (passive)Mode B, LAN1 Port, 9 - 50 VDC
- Power consumptionIdle: <4 W, Max: <18 W
- Physical Interferences(PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
- Ethernet5 x RJ45 ports, 10/100/1000 Mbps
- I/Os1 x Digital Input, 1 x Digital Output on 4-pin power connector
- Status LEDs3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
- SIM2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
- Power1 x 4-pin DC power connector
- Antennas4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
- USB1 x USB A port for external devices
- ResetReboot/User default reset/Factory reset button
- Other1 x Grounding screw
- Physical Specification
- Casing materialAluminum housing
- Dimensions (W x H x D)132 x 44.2 x 95.1 mm
- Weight533 g
- Mounting optionsDIN rail (can be mounted on two sides), flat surface placement
- Operating Environment
- Operating temperature-40 °C to 75 °C
- Operating humidity10 % to 90 % non-condensing
- Ingress Protection RatingIP30
Параметры товара поставщика
Product code
LTERUTX50
Category
Rout
Brand
Teltonika
Supplier's product code
LTERUTX50
Product ID
U-2896043
Информация, предоставленная поставщиком, может отличаться от самого продукта. Если вы заметили неточности, сообщите нам об этом, написав на адрес [email protected].
