TP-Link TL-SF1005P | Switch | 5x RJ45 100Mb/s, 4x PoE, 58W, TP-LINK
Pristatymo terminai
Prekė užsakoma iš tiekėjo sandėlio. Jei tiekėjas šios prekės pristatyti iki nurodytos datos negalės, informuosime jus el. paštu.
 Yra | Tiekėjo sandėlis |
Pristatymas į namus
Pristatymas į namus
Perdavę prekes kurjeriui, informuosime Jus el. paštu.
Virš 50,00 € (Užsakymams iki 1000 kg) | Nemokamai |
Iki 50,00 € (Užsakymams iki 3 kg) | 3,49 € |
Iki 50,00 € (Užsakymams iki 1000 kg) | 4,99 € |
Pristatymas į paštomatą
Pristatymas į paštomatą
2,39 €
Tiekėjo prekės aprašymas
TP-Link SF1005P - PoE switch with five ports
The PoE switch TL-SF1005P has 5 RJ45 ports with a speed 10/100 Mb/s, which do not require configuration. Four of them (from 1 to 4) support Power over Ethernet (PoE) function. The switch automatically detects powered devices (PD - powered device) operating in IEEE 802.3af standard and supplies them with power. This solution allows to extend the range of the network in places where there is no access to sockets or power lines, and there is a need to locate access points, IP cameras, IP phones etc.
Preventing overloads
Each port of the switch is equipped with the automatically negotiated connection speed function. The device also has a priority function, thanks to which it is able to protect the system in moments of overload. Power consumption of devices powered via PoE is up to 58 W, and devices connected to higher priority ports are powered first.
Protection in moments of overload
Port priorities: port-1, port-2, port-3, port-4. This function protects the system in moments of overload. For example, when ports 1, 2 and 4 take 15.4 W (where the maximum value for the port is 15.4 W), then the system takes 46.2 W (the PoE LED will light up red). If a 12 W downloader is connected to port 3, the system will disconnect the power supply from port 4. Port 1 and 2 will therefore be supplied with 15.4 W, port 3 will be supplied with 12 W, while port 4 will be disconnected from the power supply.
Intuitive operation
The TL-SF1005P is easy to install and use, no configuration or installation required.
The TL-SF1005P 5-port desktop switch with four PoE ports is a great solution to expand your home or office network, thanks to its reliability and high transmission quality.
| LAN standard | Fast Ethernet 10/100Mb/s |
| Number of LAN ports | 5x 10/100BaseTX (RJ45) |
| Number of PoE ports | 4x [802.3af/at (100M)] |
| Number of WAN ports | Not applicable |
| 10G support | No |
| AC adapter included | Yes |
| Auto MDI/MDI-X | Yes |
| Auto-negotiation | Yes |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Built-in modem | None |
| Cable types supported | Cat3,Cat4,Cat5,Cat5e |
| Certification | FCC, CE, RoHS |
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX |
| Depth | 97.8 |
| Flow control support | Yes |
| Full duplex | Yes |
| Heat dissipation | 5.73 |
| Height | 25 |
| LED indicators | Yes |
| MAC address auto-aging supported | Yes |
| MAC address auto-learning supported | Yes |
| MAC address table | 2000 |
| Management | No |
| Maximum cable length | 100 |
| Networking standards | IEEE 802.3af,IEEE 802.3x |
| Numbers of pieces in the package | 1-pack |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | 0 - 40 |
| Output current | 1.25 |
| Output voltage | 48 |
| Package depth | 131 |
| Package height | 121 |
| Package type | Box |
| Package width | 196 |
| Power (W) | 58 |
| Power consumption (max) | 63.51 |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) ports quantity | 4 |
| Power supply included | Yes |
| Product colour | Black |
| Storage relative humidity (H-H) | 5 - 90 |
| Storage temperature (T-T) | -40 - 70 |
| Store-and-forward | Yes |
| Switch type | Unmanaged |
| Switching capacity | 1 |
| Switching layer | 2 |
| Total Power over Ethernet (PoE) budget | 58 |
| Type of case | Desktop |
| User guide | Yes |
| Width | 99.8 |
