Pristatymo terminai
Prekė užsakoma iš tiekėjo sandėlio. Jei tiekėjas šios prekės pristatyti iki nurodytos datos negalės, informuosime jus el. paštu.
Yra | Tiekėjo sandėlis |
Pristatymas į namus
Virš 50,00 € (Užsakymams iki 1000 kg) | Nemokamai |
Iki 50,00 € (Užsakymams iki 3 kg) | 3,49 € |
Iki 50,00 € (Užsakymams iki 1000 kg) | 4,99 € |
Pristatymas į paštomatą
2,39 €
Prekės aprašymas
Specifikacijos
Tiekėjo prekės aprašymas
FlySky Paladin PL18 transmitter + FTR10/FTR16S receiver set.
Ensure your comfort while controlling drones, fixed-wing aircraft, gliders and rotorcraft and bet on a FlySky kit! The PL18 transmitter operates at 2.4G frequency and offers up to 18 channels. An easy-to-read display provides the most important information about the device's operation. The transmitter is distinguished by its wide compatibility and 3G FRM301 RF module. It provides a resolution of up to 4096, and the linear error does not exceed 0.15%. It supports various RF communication protocols and guarantees reliable stability. Also noteworthy are its long range (up to 3 km) and specially designed handle. The kit also includes two receivers - FTR10 and FTR16S, which operate in the 2.4GHz band.
Upgraded RF technology
A 3G FRM301 module is built into the PL18 transmitter, which makes it stand out for its great compatibility with a variety of RF protocols. What's more, the device supports the AFHDS 3 3G RF FRM303 module with a transmitting power of up to 2 watts no matter where it is used - even in the mountains or by the sea. And that's still not all! It also supports the CRSF2 protocol and is compatible with the CRSF RF module. As a result, you will gain feedback on flight control parameters.
Ibus2 GPS display
Enjoy convenient access to vital information about the operation of your equipment. The PL18 is equipped with an Ibus2 GPS display (HVGA 3.5" TFT, 320 x 480), which shows the location of supported equipment using graphical parameters so that you can monitor the exact operating status of your drone, glider or other device in real time and use the data for precise control.
Wide compatibility
The FlySky transmitter is highly compatible and can be connected to FlySky AFHDS 2A and AFHDS 3G, among others. In addition, the PL18 automatically searches for related receivers and connects to them, saving you time. This way, when controlling, you can fully focus on the flight. What's more, the transmitter offers wireless dual receiver channel extension, free wiring and dual security. Together with the power module, it can act as a redundant receiver, and in high-speed serial port mode the latency is less than 5 ms.
Efficient power supply
The transmitter is equipped with a 4,300 mAh battery that allows up to 8 hours of operation on a single charge. You can renew the device's energy in two ways. When you charge it wired, using the micro USB interface - it will be ready to continue working in about 6 hours. On the other hand, the time it takes to charge wirelessly is about 7 hours
FTR10 and FTR16S receivers
The FTR10 and FTR16S are dual antenna receivers that operate at a frequency of 2.4 GHz. They stand out with a range of up to 3,500 meters in the air. They are designed for FS-PL18, FRM301 and FRM302 transmitters.
Included:
- PL18 transmitter x1
- FTR10 receiver x1
- FTR16S receiver x1
- Micro USB cable x1
- Switch set x2
- Sunshield x1
- User manual x1
Manufacturer | FlySky |
---|---|
Transmitter model | PL18 |
Channels | 18 |
Compatibility | Fixed-wing aircraft, helicopters, cross-country machines, engineering vehicles |
Wireless frequency (RF) | 2.4G |
RF power | 20 dBm (max.) |
2.4GHz protocol | AFHDS3 |
Distance | up to 3 km |
Channel resolution | 4096 |
Battery | 1S (3.7V) / 4300mAh (built-in) |
Charging interface | Micro USB / wireless charging |
Charging time | wired charging: 6h (5V) / wireless charging: 7h (2A) |
Working time | up to 8h |
Low voltage warning | < 3.7V |
Antenna type | Dual |
Display | HVGA 3.5" TFT, 320 x 480 |
Language | Chinese and English |
Simulator | USB |
Data interface | USB, custom interface (USART), PHJACK (PPM) |
Operating temperature | -10°C to 60°C |
Humidity range | 20% to 95% |
Online update | Yes |
Transmitter color | Black |
Dimensions (length x width x height) | 214 x 86.5 x 192 mm |
Weight of the body | 946 g |
Certifications | CE, FCC ID: N4ZFT1800, RCM |
Receiver model | FTR10 |
Compatibility | FS-PL18, FRM301, FRM302 |
Number of PWM channels | 10 |
Wireless frequency | 2.4GHz |
Wireless protocol | AFHDS 3 |
Range | up to 3500 m (air) |
Antenna type | Dual (103 mm x2) |
Power | 3.5-12V |
RSSI | Supported |
Output signal | PWM / PPM / i.bus / s.bus / UART |
Operating temperature | From -10℃ to 60℃ |
Humidity range | 20% to 95% |
Online update | Yes |
Dimensions | 52 x 28 x 22 mm |
Weight | 22 g |
Certifications | CE, RCM, FCC ID: N4ZFTR1000 |
Receiver model | FTR16S |
Compatibility | FS-PL18, FRM301, FRM302 |
PWM channels | None |
Wireless network frequency | 2.4GHz |
Wireless protocol | AFHDS 3 |
Range | up to 3500 m (air) |
Antenna type | Dual (92.5 mm x2) |
Power | 3.5-8.4V |
RSSI | Supported |
Output signal | i.bus / s.bus / PPM |
Operating temperature | From -10℃ to 60℃ |
Humidity range | 20% to 95% |
Online update | Yes |
Dimensions | 20 x 12 x 3.1 mm |
Weight | 2 g |
Certifications | CE, RCM, FCC ID: N4ZFTR16S00 |